Skip to content

How to Write a Thread for X, Threads, Bluesky and Mastodon

The short answer

A good thread is a short piece of writing cut into posts, not a pile of posts. Write the whole thing first, put the point in the first post, give each later post one idea that makes sense on its own, number the posts so readers know how long it is, and check every post against the platform’s own counting rules before you publish.

The limits differ more than most people expect: 280 weighted characters on X, 500 on Threads, 300 on Bluesky and 500 by default on Mastodon, where each server can set its own. Our character limits reference has the full details for every platform. This guide covers structure, hooks, numbering and the counting quirks that decide how many posts you need.

Should it be a thread at all?

A thread works when you have a sequence: steps, a list, a short argument, a story with beats. It works less well for a single point padded out to look substantial, or for a long article that readers would rather read in one place.

  • One idea, under the limit: post it once. Numbering a one-post “thread” only adds noise.
  • Three to a dozen connected points: a thread is a good fit.
  • Much longer, or full of links and tables: publish it as an article and use a short thread to summarize it and link to it.

Some platforms also give you room to skip the thread. X Premium subscribers can currently post up to 25,000 characters, and many Mastodon servers allow more than 500. A long single post is easier to share and quote as a whole; a thread is easier to read in a feed and to reply to point by point.

A structure that works

Most strong threads follow the same three-part shape:

  1. The opening post says what the thread delivers and why it is worth reading. Many people decide from this post alone.
  2. The body posts each carry one idea: one step, one example, one argument. A post that is quoted or shared on its own should still make sense.
  3. The closing post wraps up: a one-line summary, the link to the full piece, or a question that invites replies.

A simple skeleton you can copy:

1/ [The promise: what readers will know or be able to do]
2/ [Point one, with one concrete example]
3/ [Point two, with one concrete example]
4/ [Point three, with one concrete example]
5/ [Summary in one sentence + link or question]

Common thread types

  • List thread: “Five checks before you send a newsletter.” Each post is one item. Easy to write and easy to scan.
  • How-to thread: numbered steps in order. Put any warning before the step it applies to, not at the end.
  • Story thread: a situation, a problem, what happened, what you learned. Keep each beat to one post.
  • Announcement thread: the news in post one, details after, the link last.

Writing the first post

The first post carries the whole thread. It should be specific about what readers get, and honest about it.

  • Make a concrete promise. “Five checks to run before you send a newsletter” tells readers the topic, the format and the length. “Some thoughts on newsletters” tells them nothing.
  • Lead with the point, not the backstory. Context can come in post two.
  • Use a number when it is true. “Five checks” sets an expectation the thread then meets.
  • Skip the bait. A first post that overpromises gets a click and then loses the reader at post two.

Write two or three versions and compare them side by side; our headline writing guide applies directly, because a thread opener does the same job as a headline.

Numbering: 1/5, (1/5), [1/5] or 1/

Numbers tell readers where they are and how much is left. The format is a matter of taste, but every label takes characters from the post, and on X a few characters can push a sentence into the next post.

StyleExampleCharacters on X (with the space)At post 10 of 12
Slash1/546
Parentheses(1/5)68
Brackets[1/5]68
Open-ended1/34
  • Use “1/5” when the thread is finished before you post it. Readers know the length up front.
  • Use the open-ended “1/” when you might add posts later, for example during a live event.
  • End or start? A number at the end keeps the opening words of each post clean in the feed; a number at the start makes the order obvious when posts appear out of sequence. Pick one and keep it for the whole thread.
  • The 🧵 emoji on the first post is a common “this is a thread” signal. On X it costs 3 characters with its space, because X counts every emoji as 2.

How each platform counts characters

The same text can be a different length on each platform, because each one counts differently. These are the rules our Thread Splitter applies:

PlatformLimit per postLinksEmoji and other notes
X (Twitter)280Always 23Every emoji counts 2; Chinese, Japanese and Korean characters count 2
Threads500Counted in fullMeta does not publish an exact rule, so the splitter counts cautiously and an emoji can count 2 or more
Bluesky300Counted in fullCounts what you see as one character, so an emoji or accented letter is 1; also a 3,000-byte cap per post
Mastodon500 by default; set by each serverAlways 23A mention like @[email protected] counts only as @anna

Two consequences surprise people. A long link costs 23 characters on X and Mastodon however long it is, but its full length on Bluesky. And on Mastodon, “Thanks @[email protected]!” counts as 13 characters, while X counts the same text as 28. Mentions and hashtags otherwise count in full everywhere.

Platforms change their rules from time to time. If a post is right at the limit, the app’s own counter has the final word.

Worked example: one draft, four platforms

Here is a short list thread we drafted as a test: an opening line, five numbered checks and a closing link, 839 characters in total, with a line containing only --- to force the link into its own post. We ran it through the Thread Splitter with “1/5” numbering at the end of each post:

PlatformPostsWhy
X5280-character limit, and we added 🧵 to the first post
Threads3500 characters fit two or three checks per post
Bluesky4300 characters, and the 66-character link counts in full
Mastodon3500 characters, and the link counts as 23

The X version, exactly as the splitter produced it:

— Post 1 (269/280) —
🧵 Five checks to run before you send a newsletter, in the order that saves the most rework.

1. Read the subject line on its own. If it would still make sense in a crowded inbox a week from now, keep it. If it only works next to your opening paragraph, rewrite it. 1/5

— Post 2 (156/280) —
2. Click every link in the email, including the ones in the footer. A broken link is easy to miss in a draft and easy to catch with one deliberate pass. 2/5

— Post 3 (220/280) —
3. Read the first two lines on a phone. Many email apps show them as a preview under the subject, so make those words carry the point.

4. Check every name, date and price against the source, not against your memory. 3/5

— Post 4 (79/280) —
5. Send a test to yourself and read it in the app most of your readers use. 4/5

— Post 5 (82/280) —
The full checklist, with a printable version, is here: https://example.com/guides/newsletter-pre-send-checklist-printable 5/5

Notice post 4: check five ended up alone, at 79 characters, because checks three, four and five together would not fit in 280. The splitter prefers to break between paragraphs, so it moved check five rather than cutting it, but it cannot rewrite your text. Two easy fixes, both of which we tested:

  • Trim. Delete “under the subject” from check three. The thread drops to 4 posts: checks two and three share one post, and checks four and five share the next.
  • Regroup. Add a --- line before check four. The thread stays at 5 posts, but checks four and five now share a post instead of leaving a lonely one-line post.

Small edits like this are why it pays to split before you post, not while you post.

Before you post

  • Read each post on its own. If someone quotes post 3, does it still make sense?
  • Check every count on the target platform. Emoji, links and non-Latin scripts change the totals.
  • Keep the order. Copy the posts one at a time as you publish so nothing ends up out of sequence.
  • Describe your images. If you attach images, add alt text so everyone can follow the thread.
  • Put the link last. By the end, readers have seen your case for clicking it, and the link does not pull them away halfway through.

Using the Thread Splitter

  1. Paste the whole draft. Blank lines mark paragraphs. A line with only --- forces a new post exactly where you want one.
  2. Pick the platform. For Mastodon or a custom limit, enter the number your server or app uses.
  3. Choose numbering (1/5, (1/5), [1/5], 1/ or none), its position, and whether to add 🧵 to the first post. The splitter reserves room for the labels and re-checks when the thread grows past 9 or 99 posts.
  4. Copy and post. Each card shows its count the way that platform measures it.

The splitter breaks at the strongest natural point that fits: a manual ---, then a paragraph, then a line break, then the end of a sentence, and only then between words. Splitting and counting happen in your browser, so your draft is never uploaded. To check a single post rather than a whole thread, the Character Counter shows its length as you type.

Frequently Asked Questions

How many posts should a thread have?

As many as you have distinct points, and no more. There is no fixed ideal length. If two posts say similar things, merge them; if a post needs a second idea to make sense, it probably belongs in a separate post or an article.

Does the numbering count toward the character limit?

Yes. A label such as " 1/5" is part of the post, so it uses 4 characters on X including the space. The Thread Splitter reserves room for labels and rechecks when the thread reaches 10 or 100 posts, because the labels get longer.

Should I put the number at the start or the end of each post?

Either works. At the end, the first words of each post read cleanly in the feed; at the start, the order is obvious at a glance. Choose one position and use it for the whole thread.

Why does my thread need more posts on Bluesky than on X?

Bluesky counts links in full, while X counts every link as 23 characters. A thread with long links can therefore need extra posts on Bluesky even though its limit of 300 is higher than X's 280.

What character limit should I use for Mastodon?

Mastodon's default is 500 characters, but each server can set its own limit. Check your server's About page or the counter in its compose box and enter that number in the Thread Splitter.

Can I control where one post ends and the next begins?

Yes. Put a line containing only --- where you want a new post to start. The splitter treats it as a hard break, so you can keep a key line or call to action in its own post.

Try These Tools

Related Articles