The short answer
For most public-facing writing, such as web pages, blog posts and newsletters, a grade 7 to 9 reading level (a Flesch Reading Ease score of roughly 60 to 70 or higher) is a sensible starting point. Go lower, around grade 6 to 8, for instructions, forms, health and safety information and support articles. Writing for specialists can run higher, as long as each sentence is still clear.
Treat the number as a check on sentence length and word length, not as a grade for your writing. A low score doesn’t make a text good, and a high one doesn’t make it smart. Paste a draft into the Readability Checker to see all six scores at once.
What a reading grade level means
A reading grade level estimates how many years of US schooling a reader needs to understand a text on first reading. Grade 8 means a typical eighth grader should follow it; 13 and above means college level.
Every common formula measures the same two things in different ways:
- Sentence length: longer sentences ask the reader to hold more in memory.
- Word length: measured in syllables, letters or “complex” words of three or more syllables. Longer words tend to be less familiar.
That’s all they measure. They don’t read meaning, check facts, judge organization or know whether your reader already understands the topic. They are useful because sentence and word length are easy to count and track reasonably well with difficulty in English.
The six readability formulas
WritePadPro calculates all six of these. Here are the standard formulas, exactly as our engine applies them.
Flesch Reading Ease = 206.835 − 1.015 × (words ÷ sentences) − 84.6 × (syllables ÷ words)
Flesch–Kincaid Grade = 0.39 × (words ÷ sentences) + 11.8 × (syllables ÷ words) − 15.59
Gunning Fog = 0.4 × [(words ÷ sentences) + 100 × (complex words ÷ words)]
SMOG = 3 + √(polysyllables × 30 ÷ sentences)
Coleman–Liau = 0.0588 × L − 0.296 × S − 15.8
ARI = 4.71 × (characters ÷ words) + 0.5 × (words ÷ sentences) − 21.43 Complex words and polysyllables are words of three or more syllables. In Coleman–Liau, L is letters per 100 words and S is sentences per 100 words. In ARI, characters means letters and digits.
| Formula | Introduced | Measures word length by | Output |
|---|---|---|---|
| Flesch Reading Ease | Flesch, 1948 | Syllables per word | 0–100, higher is easier |
| Flesch–Kincaid Grade | Kincaid and colleagues, 1975 (US Navy) | Syllables per word | US grade level |
| Gunning Fog | Gunning, 1952 | Share of 3+ syllable words | Years of education |
| SMOG | McLaughlin, 1969 | Count of 3+ syllable words | US grade level |
| Coleman–Liau | Coleman and Liau, 1975 | Letters per word | US grade level |
| Automated Readability Index | Smith and Senter, 1967 | Characters per word | US grade level |
Notes on how WritePadPro applies them
- Flesch Reading Ease is capped to the 0–100 range; the raw formula can go below 0 or above 100. Grade scores are floored at 0.
- Gunning Fog: Gunning’s hand method leaves out proper nouns, familiar compound words and words that reach three syllables only through -es, -ed or -ing. Like most software, WritePadPro counts every word of three or more syllables, so its Fog score can run a little higher than a careful hand count.
- SMOG was designed for 30-sentence samples. We use McLaughlin’s simple form and show no SMOG score until the text has at least three sentences. A later regression version, 1.0430 × √(polysyllables × 30 ÷ sentences) + 3.1291, gives slightly different results, so tools that use it won’t match exactly.
- Syllables are counted with an English rule set (vowel groups, silent “e”, endings such as -ed and -le, plus a list of irregular words). It is an approximation; the Syllable Counter shows the count for each word.
The exact counting rules for words, sentences and syllables are on our How We Count page.
Flesch Reading Ease bands
| Score | Difficulty | Approximate school level |
|---|---|---|
| 90–100 | Very easy | 5th grade |
| 80–89 | Easy | 6th grade |
| 70–79 | Fairly easy | 7th grade |
| 60–69 | Standard | 8th–9th grade |
| 50–59 | Fairly difficult | 10th–12th grade |
| 30–49 | Difficult | College |
| 0–29 | Very difficult | College graduate |
A worked example
Here is a typical policy paragraph and a plain rewrite. We ran both through the WritePadPro engine.
Before: In the event that an application is submitted subsequent to the deadline, it will not be considered by the committee unless documentation demonstrating extenuating circumstances is provided by the applicant at the time of submission. Applicants are advised to utilize the online portal in order to facilitate timely processing.
After: Send your application before the deadline. The committee will not review late applications. If something outside your control made you late, include proof with your application. Use the online portal so we can process it quickly.
| Measure | Before | After |
|---|---|---|
| Words / sentences | 49 / 2 | 36 / 4 |
| Syllables | 97 | 58 |
| Words of 3+ syllables | 16 | 4 |
| Flesch Reading Ease | 14.5 (very difficult) | 61.4 (standard) |
| Flesch–Kincaid Grade | 17.3 | 6.9 |
| Gunning Fog | 22.9 | 8.0 |
| SMOG | Needs 3 sentences | 8.5 |
| Coleman–Liau | 16.1 | 11.8 |
| ARI | 17.4 | 7.8 |
To check the Flesch–Kincaid result for the rewrite by hand: 36 words ÷ 4 sentences = 9 words per sentence, and 58 syllables ÷ 36 words = 1.61 syllables per word. So 0.39 × 9 + 11.8 × 1.61 − 15.59 = 6.9.
Notice that Coleman–Liau still rates the rewrite near grade 12. It counts letters, and “application” appears three times. You can’t swap that word out, because it is the name of the thing, which is why one formula should never be the only check.
Why the scores disagree
- Different inputs. “Strengths” has one syllable but nine letters, so it looks easy to Flesch–Kincaid and hard to Coleman–Liau. Fog and SMOG count only words of three or more syllables, so text full of two-syllable words scores low on them.
- Short samples swing wildly. On its own, “Submit your application before the deadline.” scores about grade 10 on Flesch–Kincaid, because one four-syllable word sits in a six-word sample. Judge passages of a hundred words or more.
- Sentence detection. Headings, list items and abbreviations change the sentence count. WritePadPro ends a sentence at a heading, a list item or a paragraph break, and doesn’t split after “Dr.”, decimals or initials. Other tools make different choices.
- Syllable counting. No two tools count syllables identically, and small differences move Flesch scores: every extra 0.1 syllables per word lowers Flesch Reading Ease by 8.46 points.
The practical fix: pick one tool, use the same formula each time, and watch the trend across drafts. The WritePadPro editor also shows an average of the grade-based formulas, which smooths out some of the noise.
Suggested targets by audience
These are starting points we suggest, not official standards. Your real readers, and any style guide you must follow, come first.
| Content | Flesch–Kincaid grade | Flesch Reading Ease |
|---|---|---|
| Instructions, forms, health and safety information, support articles | 6–8 | 60–80 |
| General web pages, blog posts, newsletters | 7–9 | 60–70 or higher |
| News and features for a broad audience | 8–10 | 50–70 |
| Business reports and proposals for professionals | 9–12 | 40–60 |
| Academic or technical writing for specialists | 12 and above is common | 30–50 |
| Material for children | At or below the readers’ grade | Test with real readers |
Two cautions. Educated readers don’t mind easy text; they read it faster. And a technical audience still benefits from short sentences, even when the vocabulary has to stay technical.
How to lower your reading level
Each change below attacks one input of the formulas. Make them where they also help the reader, not just the score.
- Split sentences that carry two ideas. “The update, which we released on Monday after several weeks of testing, fixes the login error that some users reported.” becomes “We released the update on Monday. It fixes the login error some users reported.”
- Use the short, common word when it means the same thing. Utilize → use. Approximately → about. Commence → start. Demonstrate → show.
- Turn hidden verbs back into verbs. “Make a decision” → “decide”. “Conduct an analysis of” → “analyze”.
- Prefer active voice. “The form must be signed by the applicant” → “Sign the form.” Shorter, and it says who acts.
- Cut filler phrases. “In order to” → “to”. “Due to the fact that” → “because”. “At the present time” → “now”.
- Turn long series into lists. A sentence listing six requirements becomes a short lead-in and six bullets.
- Keep the long words you need, and explain them once. If “reimbursement” is the right term, define it on first use instead of avoiding it.
For more rewrites and a word-swap table, see our plain language guide. For sentence length specifically, read the sentence length guide.
What readability formulas can’t tell you
- Meaning and order. Shuffle the sentences of a paragraph and every score stays the same.
- Familiarity. Short jargon (“API”, “SKU”, “APR”) scores as easy even when readers don’t know it. Long but familiar words (“everybody”, “information”) score as hard.
- Layout. Headings, lists, white space and tables help readers a lot, and formulas ignore them.
- Gaming. Chopping text into fragments lowers the grade and makes reading choppier. Watch the editor’s Rhythm score, which drops when every sentence has the same length.
- Other languages. These formulas were built for English. Scores for other languages are rough at best.
When it matters, test with a few real readers: ask them to find one fact or complete one task, and watch where they hesitate.
Check reading level in WritePadPro
- Readability Checker: all six scores with colored bars, your longest sentences (over 25 words) and your most frequent complex words, with plainer alternatives for common ones.
- WritePadPro editor: a live Flesch gauge and Flesch–Kincaid grade in the sidebar, a “6 scores” panel with the average grade, and in-text highlights. A sentence is marked hard at an ARI grade of 10 to 13 with 14 or more words, and very hard at grade 14 and above (again with 14 or more words) or at 30 words or more.
- Readability Improver: specific fixes for long sentences, complex words, passive voice, long paragraphs and repeated sentence openings.
All three run in your browser, so your text stays on your device.