Skip to content

How to Reduce Word Count Without Losing Meaning

The short answer

Cut in passes, from the biggest units to the smallest: whole sections, then paragraphs, then sentences, then phrases, then single words. Structural cuts remove hundreds of words at a time; word-level cuts remove a handful. Check your count after each pass with the Word Counter so you stop as soon as you hit the target, and reread for meaning before you call it done.

This guide gives you a step-by-step method and 67 before-and-after edits you can apply straight away.

Before you cut: know the target and how it’s counted

Work out exactly how much has to go. If your draft is 2,340 words and the limit is 2,000, you need to cut 340 words, or 14.5% of the text. Spread that across sections in proportion to their length: a 400-word section should give up about 58 words. That stops you from gutting the conclusion because you ran out of patience.

Then check what counts. WritePadPro’s Word Counter counts words separated by spaces, the same rule word processors use, so a hyphenated word such as “well-known” or a contraction such as “don’t” counts as one word, and so does a number like “2,340.” Assignments and publishers differ on whether headings, captions, footnotes, tables and the reference list count toward the limit. If the brief doesn’t say, ask.

The trimming method, step by step

  1. Save a copy. Keep the original so you can restore anything you cut by mistake. In the WritePadPro editor, Save version (Ctrl+S) stores a snapshot you can compare and restore later.
  2. Cut whole sections first. Read your outline, not your prose. Remove sections that don’t serve the reader’s main question, duplicate another section, or give background the audience already knows.
  3. Cut paragraphs that restate. Introductions that announce what’s coming and conclusions that repeat what was said are the usual suspects. Keep one clear statement of each point.
  4. Tighten sentences. Rewrite “there are” and “it is” openings, passive constructions, hidden verbs and throat-clearing (see the sentence table below).
  5. Swap wordy phrases. Replace multi-word phrases with single words: “in order to” becomes “to,” “due to the fact that” becomes “because.”
  6. Delete filler words. Very, really, quite, just, actually, basically, simply and totally rarely add meaning. The editor’s Hedges highlight marks 41 of these qualifiers, and its Complex words highlight suggests simpler alternatives for 99 formal words and 26 wordy phrases.
  7. Read it aloud. Check that every cut sentence still says what you meant, that transitions still connect, and that nothing now depends on a definition you removed.

30 wordy phrases and their short versions

The last column shows how many words each swap saves (using the first alternative).

Wordy Concise Words saved
in order to to 2
due to the fact that because 4
owing to the fact that because 4
in light of the fact that because 5
the reason why is that because 4
in the event that if 3
at this point in time now 4
at the present time now 3
a large number of many 3
the majority of most 2
with regard to about 2
with respect to about 2
prior to before 1
subsequent to after 1
in spite of the fact that although 5
for the purpose of to, for 3
has the ability to can 3
is able to can 2
in close proximity to near 3
on a daily basis daily 3
in the near future soon 3
make a decision decide 2
take into consideration consider 2
in excess of more than 1
a sufficient number of enough 3
it is possible that may, might 3
until such time as until 3
is indicative of shows 2
in a timely manner promptly 3
as a matter of fact in fact 3

25 redundant pairs

These pairs say the same thing twice. A result is already the end; history is already past. Each saves one word or more.

Redundant Concise
end result result
past history history
future plans plans
basic fundamentals fundamentals
completely finished finished
each and every each
first and foremost first
advance planning planning
unexpected surprise surprise
true facts facts
added bonus bonus
repeat again repeat
join together join
plan ahead plan
collaborate together collaborate
final outcome outcome
brief summary summary
absolutely essential essential
new innovation innovation
still remains remains
revert back revert
period of time period
in the month of May in May
red in color red
small in size small

12 sentence rewrites

Sentence-level patterns save more than single-word swaps because they remove several words at once and usually make the sentence clearer. Word counts were measured with WritePadPro’s counter.

Pattern Before After Words
“There are” openings There are three settings that control the export. Three settings control the export. 8 → 5
“It is … that” openings It is essential that you save the file before closing it. Save the file before closing it. 11 → 6
Passive voice The report was reviewed by the editor. The editor reviewed the report. 7 → 5
Throat-clearing We would like to take this opportunity to thank you for your patience. Thank you for your patience. 13 → 5
Announcing the content In this section, we will be discussing how to export your files. This section explains how to export your files. 12 → 8
Double negatives This is not an uncommon problem for new users. New users often have this problem. 9 → 6
Hidden verbs She made a decision to conduct an investigation into the complaint. She decided to investigate the complaint. 11 → 6
Stacked qualifiers The software is basically really quite easy to use. The software is easy to use. 9 → 6
Backward references As I mentioned earlier in this article, page count depends on the font. Page count depends on the font. 13 → 6
Over-explained instructions Click on the button that says Save. Click Save. 7 → 2
“What this means is” What this means is that your drafts stay on your device. Your drafts stay on your device. 11 → 6
Wordy relative clauses Each of the students who were enrolled in the class received a copy. Each student in the class received a copy. 13 → 8

Passive voice isn’t always wrong; sometimes the actor is unknown or unimportant. Our guide to active vs passive voice explains when to keep it.

A worked example, pass by pass

Original (79 words):

In today’s world, it goes without saying that almost everyone writes something online. In this post, we are going to take a look at a number of different ways in which you can make your writing shorter. It is a fact that, in the majority of cases, shorter writing is basically easier to read and understand. Due to the fact that readers are busy, they really do appreciate it when writers get to the point in a quick manner.

Pass 1, cut sentences that add nothing (66 words): the opening sentence is throat-clearing, so it goes.

In this post, we are going to take a look at a number of different ways in which you can make your writing shorter. It is a fact that, in the majority of cases, shorter writing is basically easier to read and understand. Due to the fact that readers are busy, they really do appreciate it when writers get to the point in a quick manner.

Pass 2, tighten sentences and swap phrases (38 words): “we are going to take a look at a number of different ways in which” becomes “shows several ways”; “it is a fact that, in the majority of cases” becomes “in most cases”; “due to the fact that” becomes “because”; “in a quick manner” becomes “quickly.”

This post shows several ways to make your writing shorter. In most cases, shorter writing is basically easier to read and understand. Because readers are busy, they really do appreciate it when writers get to the point quickly.

Pass 3, delete filler and merge (25 words): “basically,” “really do” and “and understand” go, “make your writing shorter” becomes “shorten your writing,” and the last sentence is recast around “busy readers.”

This post shows several ways to shorten your writing. Shorter writing is usually easier to read. Busy readers appreciate writers who get to the point.

That is 54 words removed, about 68% of the original, and every point the reader needs is still there. Most real drafts won’t shrink this much, because this example was deliberately padded, but the order of the passes is the same.

What not to cut

  • Evidence. Citations, data, quotations and the specific example that proves your point. Cutting these makes text shorter and weaker.
  • Definitions your readers need. If a term is new to the audience, the explanation stays.
  • Logical connectors. Words such as “because,” “however” and “so” carry the argument. See the sentence length guide for splitting long sentences without losing those links.
  • Required sections. An abstract, a methods section or a disclosure may be mandatory even if it feels long.
  • Specifics. “About 40 minutes” is longer than “quickly” but far more useful. Cut vague words, not precise ones.

Don’t game the count

Hyphenating unrelated words, deleting spaces, or moving text into images or tables to dodge a word limit is easy to spot, and different counters treat these tricks differently, so it can backfire. Contractions are a legitimate cut in informal writing (“do not” to “don’t” saves a word each time), but many academic and formal styles discourage them. Check your style guide before converting every “it is” to “it’s.”

Cutting to a character limit instead

Meta descriptions, social posts, SMS messages and form fields limit characters, not words. The same methods apply, but short words now matter more than few words: “use” beats “utilize” by five characters. Paste the text into the Character Counter to see characters with and without spaces as you edit.

Tools that speed this up

  • Word Counter: live word, character, sentence and reading-time counts while you edit.
  • WritePadPro editor: Complex words and Hedges highlights mark wordy phrases and qualifiers in place; set a word goal to track progress toward the limit.
  • Readability Improver: flags sentences over 25 words, passive voice and complex words with simpler alternatives.
  • Duplicate Word Finder: finds doubled words and the same word repeated close together, which often signals a sentence that can be merged or cut.

Clichés are another easy source of extra words; “at this point in time” is five words for “now.” Our list of clichés and plain alternatives covers more than 200 of them. Everything runs in your browser, so your draft never leaves your device.

Frequently Asked Questions

What is the fastest way to reduce word count?

Start with the largest cuts: remove sections or paragraphs that repeat a point, give background the reader doesn’t need, or announce what is coming. Then swap wordy phrases such as “in order to” for “to” and delete filler words such as very, really and basically. Check the count after each pass.

Do hyphenated words count as one word?

In WritePadPro’s Word Counter, yes. It counts words separated by spaces, the same rule word processors use, so “well-known” is one word. Some other tools split on hyphens, so if a limit is strict, check with the counter your teacher, editor or platform uses.

Do contractions reduce word count?

Yes. “Do not” is two words and “don’t” is one, so each contraction saves a word. Many academic and formal style guides discourage contractions, though, so check the rules for your assignment or publication before relying on them.

Does the reference list count toward the word limit?

It depends on the institution or publisher. Some exclude the reference list but count in-text citations; others count everything. If the brief doesn’t say, ask your instructor or editor rather than guessing.

How much can I cut without losing meaning?

There is no fixed percentage. A padded first draft can often lose a large share of its words, while a tight draft may only lose a little. Cut until every remaining sentence carries information the reader needs, then stop, even if you are under the limit.

Try These Tools

Related Articles